Oxy Boost Stain Remover is a powerful cleaning solution formulated with 100% oxygen bleach. It quickly dissolves tough stains and odors, restoring fabrics and surfaces to their original brightness. It is safe for all colors and gentle on the environment - the perfect choice for your next deep clean.
Non-chlorine bleach alternative. No optical brighteners. No hormone disruptors.
BASIC DIRECTIONS FOR CLEANING & LAUNDRY:
Clothing Cleaning: Small load – 1/2 TBSP of powder Medium load – 1 TBSP of powder Large load – 2 TBSP of powder General Cleaning: Mix 2 TBSP of powder in a gallon of warm water Heavy Cleaning: Mix 8 TBSP of powder in a gallon of hot water. Soaks:Mix 4 TBSP powder in a gallon of hot water. Paste: Mix 2-4 TBSP of powder with just enough water to make a paste.
Ingredients: Sodium Percarbonate
IN DEPTH DIRECTIONS FOR CLEANING:
Carpet, Couches, Upholstery, Car Seats To de-stain & deodorize, begin by mixing the General Cleaning Recipe. Remove as much of the dirt or stain liquid as you can. Spray Oxy Boost solution on spot, work into area with a brush, and let stand 5-10 minutes. Rinse thoroughly by pouring fresh water over spot. Blot up with a clean cloth or towel. Vacuum thoroughly when 100% dry. Always test for colorfastness before applying Oxy Boost.
Carpet Cleaning Machines Add 1 oz of Oxy Boost per gallon of warm water in the solution tank
Curtains, Sheers To de-stain and deodorize curtains/sheers that are yellow, dingy or smoke-stained, use the Heavy Cleaning Recipe and allow items to soak 30-60 minutes. Rinse thoroughly with fresh water and let dry.
Tile & Grout Mix the General Cleaning Recipe. Saturate tiles and grout completely by pouring solution on floors or spraying/sponging on walls. For best results let it sit at least 60 minutes. Once grout is fully penetrated with Un-Bleach, scrub tiles and grout. Rinse away with clean water. Air dry. For large flooring of tiles, instead add the General Cleaning Recipe to mop water. Scrub tiles with mop. Let Oxy Boost mop solution sit for 30 minutes. Rinse away with clean water. Air dry.
Kitchen Stained dishes, burned on-food, grimy baking sheets — add 1-2 ounces of Oxy Boost into to the container to be cleaned or into a dish soak and let sit for at least 15 minutes. Scrub away mess with hot water.
Drains — to keep your drains and disposals clear and smelling fresh add 1 ounce of Oxy Boost in 8 ounces of hot water and let solution to overnight in drain.
Refrigerator — eliminate mold, mildew, and other organic stains, mix 4 oz of Oxy Boost in a gallon of warm or hot water. (1 oz per quart). Apply with a soft cloth, let sit 10-20 minutes, then wipe and rinse thoroughly.
Cutting Boards, Tupperware, Countertops — mix a General Cleaning Recipe and apply with a soft cloth, squirt bottle or sprayer, let stand 5-10 minutes and rinse. For extra strong stains, soak item with the Oxy Boost extra strong solution for 15-20 minutes, rinse thoroughly.
Sponge soak — deodorize and remove stains in your kitchen sponge by soaking it in 1 teaspoon of Oxy Boost stirred into 2 cups of boiling water. Let the sponge sit until the water cools completely, then rinse it well and squeeze it dry.
Bathroom Toilet stains — sprinkle 1-2 tablespoons of Oxy Boost into your toilet, wait 2 hours, and then scrub with a toilet brush and flush. For stubborn stains, leave Oxy Boost in overnight — don’t use the toilet in the meantime.
Tub & Shower — Mix the Oxy Boost Paste Recipe and scrub it on the surface with a cloth or sponge, wait 15 minutes then rinse or use.
Household Cleaning mops — add 3 ounces to a gallon of hot water, soak overnight then rinse.
Mildew removal or to clean basement floors after water damage from flooding — add 4 ounces of Oxy Boost to a gallon of hot water, scrub surface, wait 30 minutes then rinse.
Litter box cleaning + deodorizing — spray them down with a General Cleaning Recipe, let sit for 20 minutes then rinse.
Urine, feces, or vomit stains on carpets or upholstery — add one teaspoon of Oxy Boost to 8 ounces of water, wipe onto stain, wait 10 minutes then rinse.
Blood Stains – Mix The Oxy Boost General Recipe, spray generously on mess, scrub well, let stand for at least 10 minutes, then rinse with cold water.
Fencing, Concrete, Siding, Wood Decks, and Stucco Use the General Cleaning mix of Oxy Boost and apply with a clean lawn sprayer. Let stand 10-30 minutes, scrub if necessary and rinse thoroughly. Or mix the General Cleaning Recipe in a bucket and apply with a broom or brush, then scrub and rinse thoroughly.
Yard For deodorizing garbage cans — add 1/2 ounce per gallon of water and let soak.
For lawn furniture — add 2 ounces to hot water, scrub, wait 15 minutes, then rinse.
For all-weather carpeting — add 4 ounces to a gallon of warm water scrub with a stiff broom, wait 20 minutes then rinse.
Water Damage Cleanup & Mildew Removal To remove mold and mildew prior to painting or to clean up water damage — mix the Soaking Recipe, apply to surface, and scrub with a brush or sponge. Let stand 20-30 minutes and rinse thoroughly.
The bar is so convenient for both every day use(no bottles to knock over in the shower) and on vacation (easy packing). The scent is so refreshing and it makes your hair feel fabulous. Highly recommend.